MDS System Major Components Include

  • Dual-Arm Mobile Display Stand

  • Two  26” high brightness, high definition LED video monitors

  • Video Router/Controller with Touchscreen User Interface

  • Dual 8” (20cm) “Preview” Reference Monitors, mounted to MDS stand center column

  • Two protective covers for 26” monitors

  • Video connections cable kit

Dual Arm Mobile Display Stand

  • Positioning FlexibilityThe MDS stand provides a wide-range of vertical and horizontal positioning for convenient placement of video monitors at the desired location during surgical, interventional and diagnostic procedures. The stand includes three equipment shelves for placement of ancillary equipment such as cameras, light sources, printers and more.

Monitor Boom Arms

  • Dual articulating arms with positioning handles and low-force manual motion for easy video monitor positioning. Fully counterbalanced manual height adjustment of articulating monitor arms with manual pivot and rotation of monitors.

  • Cable track allows vertical height adjustment of arms without cabling stress.

Equipment Shelves

  • Three built-in, adjustable equipment shelves: 19.75” (50 cm) wide x 19.75” (50cm) depth. Maximum shelf load per shelf: 25 lbs. (11 kg per shelf).

Transport and storage

  • Lockable double-wheeled 6” casters with cable pushers. Rear casters include steering lock position for easy transport.

  • Ergonomic transport handles, front and rear, for easy transport and positioning.

  • Built-in storage compartment for monitor protective covers.

  • Lockable double-wheeled 6” casters with cable pushers. Rear casters include steering lock position for easy transport


  • Built-in isolation transformer and AC power strip for connection of system video components and up to five available outlets for connection of ancillary equipment.

  • Choice of AC power type (must specify with order):

    • North America Version: For connection to 110- 120VAC, 60 Hz, 15 amp outlet. Includes built-in 1,800 Watt isolation transformer and 15 amp power cord and hospital grade plug. Maximum allowable combined load on MDS power strip = 12 amps.

    • EU Version: For connection to 220-240 VAC, 50 Hz, ~10 amp outlet (must specify country plug type). Includes 1800 Watt isolation transformer, power cord and plug. Maximum allowable combined load on MDS power strip = 7.5 amps.

26” High Definition, High-Brightness LED  Video Monitors

  • LED backlight technology for very high brightness. Full multi-modality with multiple inputs. Switchable source video display and single image, picture-in-picture, or split-screen mode

  • Resolution: 1920 x 1080 • Aspect ratio: 16:9

  • Brightness: 700 cd/m² maximum, 500 cd/m² stabilized

  • Weight: 18.2 lbs (8.27 kg)

  • Power consumption: 150 watts • Picture size: 21.6” x 13.5” (550 x 344 mm), 25.5” (649mm)

Video Router/Controller

Medical imaging video router with touch-screen operator control. Allows any input to be routed to either monitor and allows any two inputs to be displayed on a single monitor in picture-in-picture or split screen format. Allows various inputs to be used without hard wire changes to monitor connections.

Includes eight video input connections:

  • DVI-D (3) • 3G-SDI (1)

  • S-Video (1)

  • Component (1)

  • VGA/SOG (1)

  • DVI-I/RGBS/YPbPr (1)

Includes three 3 video output connectors:

  • Two 3G-SDI - these are used for connection to system monitors

  • One DVI-D - for connection of external devices such as printers, DVRs, etc.

The ConductOR video router also has audio input/output, LAN and Ethernet connections.

  • Dimensions: 15” W x 3.5” H x 14.75” D (381 x 89 x 375 mm)

  • Weight: 10.5 lbs (4.13 kg)

  • Power consumption: 66 watts

Dual 8” “Preview” Reference Monitors

The preview monitors are mounted to the MDS stand center column above the top shelf for easy visualization of video routing while operating the ConductOR touchscreen control. The left and right preview monitors serve as visual reference for the left and right 26" monitors mounted to the MDS articulating arms.

Protective Covers

Foam padded construction for monitor glass protection during transport and storage. Cleanable fabric cover material with Velcro straps for easy cover attachment and removal.

Video Connections Cable Kit

Cable Kit is provided to support the connection of internal (mounted on shelves) and external (C-Arms, Ultrasound etc.) video sources. Inputs supported are SDI, VGA, DVI, SOG, S-Video, and Composite.






Easy monitor positioning

  • Fully-counterbalanced articulating arms for easy manual positioning with up to 36” (91cm) vertical travel and up to 81” (205.7cm) horizontal extension.

Brilliant 26” High Definition LED Monitors

  • High-brightness LED monitors display over-the-table images in wide-screen, picture-in-picture or split screen modes.

Input image from any video source
  • Multi-modality image viewing from any video source including C-arm fluoro, endoscopy, ultrasound, PACS, patient monitoring.

Simple video routing with touchscreen control
On-board touchscreen video router allows easy selection of

image location and format. User-specific settings can be saved

and recalled for easy procedural set up or customized to meet

specific need.

Portable image suite

  • Combine MDS with your C-arm and mobile table for a completely portable suite for urology, vascular, GI or other applications.

Maximizing space

  • The MDS system is the perfect alternative solution for small rooms, low ceiling heights, or construction restrictions that make fixed systems impractical. The MDS is the perfect solution to these unique opportunities and can help maximize your room potential.

Lower Cost

  • The MDS requires no time-consuming site planning or construction expense and has a substantially lower acquisition cost than fixed room solutions.

Simple installation

  • Fixed boom systems require perfect placement and infrastructure changes in order to satisfy every possible current and future clinical application. The MDS system is portable and does not require changes to existing infrastructure.

Room layout flexibility

  • The MDS mobility and positioning versatility allows convenient layout of the OR for virtually any procedure.

Easier scheduling

  • Fixed room configurations may tie surgeons to specific rooms and may limit scheduling options for OR management. The MDS adapts to the room, or the procedure at hand, and can be configured to be a multi-functional clinical procedure cart.

Open architecture

  • ​ The MDS accepts virtually all video sources from a wide variety of medical device companies. The system can be reconfigured if your technology changes, making it easier and less costly to upgrade and keep your OR state-of-the-art devices.

The mobile solution for multi-modality image visualization in surgical, GI & interventional imaging

  • The MDS adapts to the desired clinical need, monitor arms are moved to the desired location and retracted up out of the way when finished. 

  • Display images from multiple sources: endoscopy, C-arm, ultrasound, etc.

  • Lower cost alternative to ceiling or floor mounted video boom systems

  • Zero room down time, planning or installation cost.  

  • Modular in nature, easy to update as technology advances.

  • Adjustable shelves provide ample space to mount video components and in most cases reduces the number of carts required in the room.

  • Reduces the ceiling mount conflicts between the lights, monitor arms and equipment booms while still presenting clinical images in a superior location and viewing angle .